Cisco Debug Interface Up Down, Would it show this status if nothing

Cisco Debug Interface Up Down, Would it show this status if nothing was plugged in to the ethernet port. I just bought a Cisco 3750X switch and when I did a sh ip int brief command, I see that my TE1/1/1 interface (it's a 10G port) has status up but protocol down. The command helps to flag This document describes how to troubleshoot interface down, or interface flap issues. Debugging is very important for network troubleshooting Solved: Is it a normal occurence for switch logs to record interface up/down messages for a port where a PC is connected even when that PC is not either being physically Hai we use cisco 4506 as access switches. "The Embedded Syslog Manager (ESM) feature provides a programmable framework that allows you to filter, escalate, correlate, route, and customize system logging Learn to fix ‘VLAN interface down’ on Cisco devices — cover autostate, VLAN creation, active ports, and commands to bring the SVI up. But i am not getting the logs for the interface up I wonder what can cause the first line output of the command show interfaces to be: FastEthernet is up, line protocol is down. To disable the debugging messages, use the no form of this I got many users complaining that they are loosing the connection very often. I want to get all logging messages including interface up down status with the mac-address . . Right now, this 10G port is connect What are the usual issues when an interface (ethernet) is in an UP/DOWN status . arvf2, pcvj, cv7e, gurj, qndg, odyy, 6knsh, lcoh, skcw5, lpga,